Kawasaki Forums: Kawasaki Motorcycle Forum

Kawasaki Forums: Kawasaki Motorcycle Forum (https://www.kawasakiforum.com/forums/)
-   Racing (https://www.kawasakiforum.com/forums/23-racing/)
-   -   400HP + ZX12R engine (https://www.kawasakiforum.com/forums/23-racing/369-400hp-zx12r-engine.html)

KarSung 09-21-2009 09:09 PM

400HP + ZX12R engine

I thought this might be of interest to Judley and Imp Paul.

Its built by a guy called Doug (good name) Meyers in the states and was used to set the landspeed record for a bike with paniers/saddlebags on!
It reached 219mph.

The engine made 423bhp on a lower boost setting.

Spec and pics

84mm small pin turbo pistons $288
Custom small pin rod bushings
2nd inlet cam (used @exhaust side)
Adjustable cam sprockets
Turbo valve springs (high press inlet) $226
Cylinder head studs/nuts
Freshly fit main and rod bearings
Turbonetics T3/T4 Hybrid Turbo $1040
Multi-stage waste gate $335
Fuel pump $572
Fuel pressure regulator $331
550 cc injectors $267
Muzzy billet velocity stacks
Stainless Turbo exhaust $335
Stainless inlet ducting $170
Billet airbox (frame) filter block-offs
Billet oil filter relocation housing
Turbo scavenge pump $203
Muzzy clutch kit incl. drilled hub, springs/plates
DTA ECU (incl. software) $750
Innovative Multi stage boost controller (faulty)
Boost controller solenoids
Complete DTA wiring harness $146
DTA Computer data download cable
Air temp sensor
Water temp sensor
3 bar ABS sensor $75
7mm plug wires
Data acquisition:
Racepak V300 Data Recorder
8 channel (4 digital, 4 analog) $1395
4 probe EGT Option (incl. Probes) $671
UEGO O2 Sensor $600
UEGO Data Controller $400
V300 Clutch RPM upgrade $250
V300 Air Fuel module $150
Back pressure monitor $238
Manifold presser sensor $238
All necessary software



Welcome, my name is Doug and I am a boostaholic.

raz631 08-22-2011 05:50 PM

Wow, that is a work of art!!

By the looks of the work you have don on your 12 you may know the answer to my question....

The two bolts that go into the head just above the two middle exhaust ports, can they be safely drilled out and hellicoiled at 8mm?

Only asking as one of mine has stripped and I am bit worried about drilling it out and taking the edge of a water jacket with it..

Once again, Nice work!

Dale :)

kawi7rr 09-21-2011 06:03 PM

that is sick dude. :O

zx1400jay 09-30-2011 02:17 PM

Love it!! :-)

Zaberisvol 04-18-2014 07:03 AM

Thank you for*your posts!*Very interesting!

Laurene19996 03-18-2016 10:25 PM

Thank you for your posts!

All times are GMT -5. The time now is 12:04 AM.

Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.

For the best viewing experience please update your browser to Google Chrome