ZZR600 Carb Question
I had a problem with the engine missing when the throttle opened and after stripping the carbs, I have found a tear in one of the throttle piston rubber diaphragms which was probably the problem. My question is twofold.
1. Were is the best place to get a new one from? Ebay looks pretty bare!!
2. when i took the piston jet needle out, there were two very small washers located there. I cannot remember whether they were above the circlip on the needle or below. Anyone know. I am pretty certain they were above but wanted to confirm.
The best place is ebay, i waited months to get a good one, i had a look in the manual and couldnt find ref of the washers, if you tell me you email i can send you the pics telling you how to strip and clean the carbs.
|All times are GMT -5. The time now is 10:56 AM.|
Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.